02 May How the authors approach to the issue & what proposed ideas they mentioned Strengths and Weakness – strengths & weakness of the proposed approach & design, and about the paper. ?what
I need the following after reviewing the paper
Problem Statement – Issues discussed by the author
Approach & design – How the authors approach to the issue & what proposed ideas they mentioned
Strengths and Weakness – strengths & weakness of the proposed approach & design, and about the paper. what are the key strengths of the authors proposed system and weakness of the system.
Evaluation(Performance) – How the authors evaluated the proposed system, what parameters they used to test the performance
Conclusion(In readers perspective)
Along with these, I need to have a detailed explanation of the paper section-wise:
sections are:
Abstract
Introduction
FUSE Semantics and API (in detail)
Applications
Liveness Checking Topologies
Implementation(in detail)
Experimental Evaluation(in detail)
Summary
Conclusion of the authors for proposed system
FUSE: Lightweight Guaranteed Distributed Failure Notification
John Dunagan∗ Nicholas J. A. Harvey‡ Michael B. Jones∗ Dejan Kostić†
Marvin Theimer∗ Alec Wolman∗
“I am not discouraged, because every failure is another step forward.” – Thomas Edison
Abstract
FUSE is a lightweight failure notification service for building distributed systems. Distributed systems built with FUSE are guaranteed that failure notifications never fail. Whenever a failure notification is triggered, all live members of the FUSE group will hear a notifica- tion within a bounded period of time, irrespective of node or communication failures. In contrast to previous work on failure detection, the responsibility for deciding that a failure has occurred is shared between the FUSE service and the distributed application. This allows applications to implement their own definitions of failure. Our expe- rience building a scalable distributed event delivery sys- tem on an overlay network has convinced us of the use- fulness of this service. Our results demonstrate that the network costs of each FUSE group can be small; in par- ticular, our overlay network implementation requires no additional liveness-verifying ping traffic beyond that al- ready needed to maintain the overlay, making the steady state network load independent of the number of active FUSE groups.
1 Introduction
This paper describes FUSE, a lightweight failure noti- fication service. When building distributed systems, man- aging failures is an important and often complex task. Many different architectures, abstractions, and services have been proposed to address this [5, 10, 13, 28, 30, 38, 42, 43, 44]. FUSE provides a new programming model for failure management that simplifies the task of agree- ing when failures have occurred in a distributed system, thereby reducing the complexity faced by application de- velopers. The most closely related prior work on coping with failures has centered around failure detection ser- vices. FUSE takes a somewhat different approach, where
∗Microsoft Research, Microsoft Corporation, Redmond, WA. {jdunagan, mbj, theimer, alecw}@microsoft.com
†Department of Computer Science, Duke University, Durham, NC. [email protected]
‡Computer Science and Artificial Intelligence Laboratory, Mas- sachusetts Institute of Technology, Cambridge, MA. [email protected]
detecting failures is a shared responsibility between FUSE and the application. Applications create a FUSE group with an immutable list of participants. FUSE monitors this group until either FUSE or the application decides to terminate the group, at which point all live participants are guaranteed to learn of a “group failure” within a bounded period of time. This focus on delivering failure notifica- tions leads us to refer to FUSE as a failure notification service. This is a very different approach than prior sys- tems have adopted, and we will argue that it is a good approach for wide-area Internet applications.
Applications make use of the FUSE abstraction as fol- lows: the application asks FUSE to create a new group, specifying the other participating nodes. When FUSE fin- ishes constructing the group, it returns a unique identifier for this group to the creator. The application then passes this FUSE ID to the applications on all the other nodes in this group, each of which registers a callback associ- ated with the given FUSE ID. FUSE guarantees that every group member will be reliably notified via this callback whenever a failure condition affects the group. This fail- ure notification may be triggered either explicitly, by the application, or implicitly, when FUSE detects that com- munication among group members is impaired.
Applications can create multiple FUSE groups for dif- ferent purposes, even if those FUSE groups span the same set of nodes. In the event that FUSE detects a low-level communication failure, failure will be signalled on all the FUSE groups using that path. However, on any individual FUSE group the application may signal a failure without affecting any of the other groups.
FUSE provides the guarantee that notifications will be delivered within a bounded period of time, even in the face of node crashes and arbitrary network failures. We refer to these semantics as “distributed one-way agree- ment”. One-way refers to the fact that there is only one transition any group member can see: from “live” to “failed”. After failure notification on a group, detecting future failures requires creating a new group.
By providing these semantics, FUSE ensures that fail- ure notifications never fail. This greatly simplifies failure handling among nodes that have state that they want to handle in a coordinated fashion. FUSE efficiently handles all the corner cases of guaranteeing that all members will be notified of any failure condition affecting the group. Applications built on top of FUSE do not need to worry
that a failure message did not get through or that orphaned state remains in the system.
The primary target for FUSE is wide-area Internet ap- plications, such as content delivery networks, peer-to-peer applications, web services, and grid computing. FUSE is not targeted at applications that require strong consis- tency on replicated data, such as stock exchanges and missile control systems. Techniques such as virtual syn- chrony [6], Paxos [29], and BFT [10] have already proven to be effective in such environments. However, these tech- niques incur significant overhead and therefore have lim- ited scalability. Furthermore, FUSE does not provide re- silience to malicious participants, though it also does not preclude solving this problem at a higher layer.
Previous work on failure detection services uses “membership” as the fundamental abstraction: these ser- vices typically provide a list of each component in the system, and whether it is currently up or down. Member- ship services have seen widespread success as a building block for implementing higher level distributed services, such as consensus, and have even been deployed in such commercially important systems as the New York Stock Exchange [5]. However, one disadvantage of the mem- bership abstraction is that it does not allow application components to have failed with respect to one action, but not with respect to another. For example, suppose a node is engaged in an operation with a peer and at some point fails to receive a timely response. The failure manage- ment service should support declaring that this operation has failed without requiring that a node or process be de- clared to have failed. The FUSE abstraction provides this flexibility: FUSE tracks whether individual application communication paths are currently working in a manner that is acceptable to the application.
The scenario described above is more likely to oc- cur with wide-area Internet applications, which face a demanding operating environment: network congestion leads to variations in network loss rate and delay; intran- sitive connectivity failures (sometimes called partial con- nectivity failures) occur due to router or firewall miscon- figuration [27, 31]; and individuals network components such as links and routers can also fail. Under these con- ditions, it is difficult for applications to make good deci- sions based solely on the information provided by a mem- bership service. A particular scenario illustrating why applications need to participate in deciding when failure has occurred is delivery of streaming content over the In- ternet: failure to achieve a certain threshold bandwidth may be unacceptable to such an application even though other applications are perfectly happy with the connectiv- ity provided by that same network path.
Our FUSE implementation is scalable, where scaling is with respect to the number of groups: multiple failure notification groups can share liveness checking messages. Other implementations of the FUSE abstraction may sac- rifice scalability in favor of increased security. Our FUSE implementation is designed to support large numbers of
small to moderate size groups. We do not attempt to effi- ciently support very large groups because we believe very large groups will tend to suffer from too-frequent failure notification, making them less useful.
Our FUSE implementation is particularly well-suited to applications using scalable overlay networks. Scalable overlay networks already do liveness checking to main- tain their routing tables and FUSE can re-use this live- ness checking traffic. In such a deployment, the network traffic required to implement FUSE is independent of the number of groups until a failure occurs; only creation and teardown of a group introduce a per-group overhead. FUSE can be implemented in the absence of a pre-existing overlay network – the implementation can construct its own overlay, or it can use an alternative liveness checking topology.
We have implemented FUSE on top of the Skip- Net [25] scalable overlay network, and we have built a scalable event delivery application using FUSE. We eval- uated our implementation using two main techniques: a discrete event simulator to evaluate its scalability, and a live system with 400 overlay participants (each running in its own process) running on a cluster of 40 worksta- tions to evaluate correctness and performance. Both the simulator and the live system use an identical code base except for the base messaging layer. Our live system eval- uation shows that our FUSE implementation is indeed lightweight; the latency of FUSE group creation is the la- tency of an RPC call to the furthest group member; the la- tency of explicit failure notification is similarly dominated by network latency; and we show that our implementation is robust to false positives caused by network packet loss.
In summary, the key contributions of this paper are:
• We present a novel abstraction, the FUSE failure notifi- cation group, that provides the semantics of distributed one-way agreement. These are desirable semantics in our chosen setting of wide-area Internet applications.
• We used FUSE in building a scalable event delivery ser- vice and we describe how it significantly reduced the complexity of this task.
• We implemented FUSE on top of a scalable overlay net- work. This allowed us to support FUSE without adding additional liveness checking. We experimentally eval- uated the performance of our implementation on a live system with 400 virtual nodes.
2 Related Work
Failure detection has been the subject of more than two decades of research. This work can be broadly classified into unreliable failure detectors, weakly consistent mem- bership services, and strongly consistent membership ser- vices. Unreliable failure detectors provide the weakest semantics directly, but they are a standard building block in constructing membership services with stronger se- mantics. Both weakly-consistent and strongly-consistent
membership services are based on the abstraction of a list of available or unavailable components (typically pro- cesses or machines). In contrast, a FUSE group ID is not bound to a process or machine and hence can be used in many contexts. For example, it can correspond to a set of several processes, or to related data stored on several different machines. This abstraction allows FUSE to pro- vide novel semantics for distributed agreement, a subject we will elaborate on in our discussion of weakly consis- tent membership services.
Chandra et al. formalized the concept of unreliable failure detectors, and showed that one such detector was the weakest failure detector for solving consensus [11, 12]. Such detectors typically provide periodic heartbeat- ing and callbacks saying whether the component is “re- sponding” or “not responding.” These callbacks may be aggregate judgments based on sets of pings. Unreliable failure detectors provide the following semantic guaran- tee: fail-stop crashes will be identified as such within a bounded amount of time. There has been extensive work on such detectors, focusing on such aspects as interface design, scalability, rapidity of failure detection, and mini- mizing network load [1, 17, 21, 23, 38].
FUSE uses a similar lightweight mechanism (periodic heartbeats) to unreliable failure detectors, but provides stronger distributed agreement semantics. Unreliable fail- ure detectors are typically used as a component in a mem- bership service, and the membership service is responsi- ble for implementing distributed agreement semantics.
Weakly consistent membership services have also been the subject of an extensive body of work [2, 19, 42, 44]. This work can be broadly classified as differing in speed of failure detection, accuracy (low rate of false positives), message load, and completeness (failed nodes are agreed to have failed by everyone in the system). Epidemic and gossip-style algorithms have been used to build highly scalable implementations of this service [19, 42]. Pre- vious application areas that have been proposed for such membership services are distributed collaborative appli- cations, online games, large-scale publish-subscribe sys- tems, and multiple varieties of Web Services [5, 19]. These are the same application domains targeted by FUSE, and FUSE has similar overhead to a weakly con- sistent membership service in these settings. Typical char- acteristics of such applications are that many operations are idempotent or can be straightforwardly undone, oper- ations can be re-attempted with a different set of partici- pants, or the decision to retry can be deferred to the user (as in an instant messaging service).
One novel aspect of the FUSE abstraction is the ability to handle arbitrary network failures. In contrast, weakly consistent membership services provide semantic guaran- tees assuming only a fail-stop model. One kind of net- work failure where the FUSE abstraction is useful is an intransitive connectivity failure: A can reach B, B can reach C, but A cannot reach C. This class of network fail- ures is hard for a weakly consistent membership service to
handle because the abstraction of a membership list lim- its the service to one of three choices, each of which has drawbacks:
• Declare one of the nodes experiencing the intransitive connectivity failure to have failed. This prevents the use of that node by any node that can reach it.
• Declare all of the nodes experiencing the intransitive failure to be alive because other nodes in the system can reach them. This may cause the application to block for the duration of the connectivity failure.
• Allow a persistent inconsistency among different nodes’ views of the membership list. This forces the application to deal with inconsistency explicitly, and therefore the membership service is no longer reducing the complexity burden on the application developer.
FUSE appropriately handles intransitive connectivity failures by allowing the application on a node experienc- ing a failure to declare the corresponding FUSE group to have failed. Other FUSE groups involving the same node but not utilizing a failed communication path can continue to operate. Application participation is required to achieve this because FUSE may not have detected the failure itself; like most weakly consistent membership services, FUSE typically monitors only a subset of all application-level communication paths.
FUSE would require application involvement in failure detection even if it monitored all communication paths. Consider a multi-tier service composed of a front-end, middle-tier, and back-end. Suppose the middle-tier com- ponent is available but misconfigured. FUSE allows the front-end to declare a failure, and to then perform appro- priate failure recovery, such as finding another middle-tier from some pool of available machines. This difference in usage between membership services and FUSE reflects a difference in philosophy. Membership services try to proactively decide at a system level whether or not nodes and processes are available. FUSE provides a mecha- nism that applications can use to declare failures when application-level constraints (such as configuration) are violated.
Another contrast between the two approaches is that the FUSE abstraction enables “fate-sharing” among dis- tributed data items. By associating these items with a sin- gle FUSE group, application developers can enforce that invalidating any one item will cause all the remaining data items to be invalidated. Weakly consistent membership services do not explicitly provide this tying together of distributed data.
Strongly consistent membership services share the ab- straction of a membership list, but they also guarantee that all nodes in the system always see a consistent list through the use of atomic updates. Such membership services are an important component in building highly available and reliable systems using virtual synchrony. Notable exam- ples of systems built using this approach are the New York
and Swiss Stock Exchanges, the French Air Traffic Con- trol System, and the AEGIS Warship [2, 5, 6]. However, a limitation of virtual synchrony is that it has only been shown to perform well at small scales, such as five node systems [6].
Some network routing protocols, such as IS-IS [8], OSPF [33], and AutoNet [35], use mechanisms simi- lar to FUSE. One similar aspect of AutoNet is its use of teardown and recreate to manage failures. Any link- state change causes all AutoNet switches to discard their link-state databases and rebuild the global routing table. OSPF and IS-IS take local link observations and prop- agate them throughout the network using link-state an- nouncements. They tolerate arbitrary network failures using timers and explicit refreshes to maintain the link- state databases. FUSE also uses timers and keep-alives to tolerate arbitrary network failures. However, FUSE uses them to tie together sets of links that provide end-to-end connectivity between group members, and to provide an overall yes/no decision for whether connectivity is satis- factory.
A more distantly related area of prior work is black- box techniques for diagnosing failures. Such techniques use statistics or machine learning to distinguish successful and failed requests [9, 13, 14, 15, 16]. In contrast, FUSE assumes application developer participation and provides semantic guarantees to the developer. Another significant distinction is that black-box techniques typically require data aggregation in a central location for analysis; FUSE has no such requirement.
Distributed transactions are a well-known abstrac- tion for simplifying distributed systems. Because FUSE provides weaker semantics than distributed transactions, FUSE can maintain its semantic guarantees under net- work failures that cause distributed transactions to block. Theoretical results on consensus show that the possibility of blocking is fundamental to any protocol for distributed transactions [22, 24].
Two of the design choices we made in building FUSE were also recommended by recent works dealing with the architectural design of network protocols. Ji et al. [26] surveyed hard-state and soft-state signaling mechanisms across a broad class of network protocols, and recom- mended a soft state approach combining timers with ex- plicit revocation: FUSE does this. Mogul et al. [32] ar- gued that state maintained by network protocol imple- mentations should be exposed to clients of those proto- cols. As described in Section 6, we modified our overlay routing layer to expose a mechanism for FUSE to piggy- back content on overlay maintenance traffic.
3 FUSE Semantics and API
We begin by describing one simple approach to im- plementing the FUSE abstraction. Suppose every group member periodically pings every other group member with an “are you okay?” message. A group member that
is not okay for any reason, either because of node failure, network disconnect, network partition, or transient over- load, will fail to respond to some ping. The member that initiated this missed ping will ensure that a failure noti- fication propagates to the rest of the group by ceasing to respond itself to all pings for that FUSE group. Any in- dividual observation of a failure is thus converted into a group failure notification. This mechanism allows failure notifications to be delivered despite any pattern of discon- nections, partitions, or node failures. This specific FUSE implementation guarantees that failure notifications are propagated to every party within twice the periodic ping- ing interval. Our implementation uses a different liveness checking topology, discussed in Section 5. It also uses a different ping retry policy; the retry policy and the guar- antees on failure notification latency are discussed in Sec- tion 3.3.
The name FUSE is derived from the analogy to “laying a fuse” between the group members. Whenever any group member wishes to signal failure it can light the fuse, and this failure notification will propagate to all other group members as the fuse burns. A connectivity failure or node crash at any intermediate location along the fuse will cause the fuse to be lit there as well, and the fuse will then start burning in every direction away from the failure. This ensures that communication failures will not stop the progress of the failure notification. Also, once the fuse has burnt, it cannot be relit, analogous to how the FUSE facility only notifies the application once per FUSE group.
Many different FUSE implementations are possible. All implementations of the FUSE abstraction must pro- vide distributed one-way agreement: failure notifica- tions are delivered to all live group members under node crashes and arbitrary network failures. Different FUSE implementations may use different strategies for group creation, liveness checking topology, retry, programming interface, and persistence, with consequent variations in performance. In this section, we describe the choices that we made in our FUSE implementation, the resulting se- mantics that application developers will need to under- stand, and some of the alternative strategies that other FUSE implementations could use.
3.1 Programming Interface
We now present the FUSE API for our implementation. FUSE groups are created by calling CreateGroup with a desired set of member nodes. This generates a FUSE ID unique to this group, communicates it to the FUSE layers on all the specified members, and then returns the ID to the caller. Applications are subsequently expected to ex- plicitly communicate the FUSE ID from the creator to the other group members. Applications learning about this FUSE ID register a handler for FUSE notifications us- ing the RegisterFailureHandler function. In this design, the FUSE layer is not responsible for communicating the FUSE ID to applications on nodes other than the creator.
// Creates a FUSE notification group containing // the nodes in the set FuseId CreateGroup(NodeId[] set)
// Registers a callback function to be invoked // when a notification occurs for the FUSE group void RegisterFailureHandler
(Callback handler, FuseId id)
// Allows the application to explicitly cause // FUSE failure notification void SignalFailure(FuseId id)
Figure 1. The FUSE API
We believe the most likely use of FUSE is to allow fate-sharing of distributed application state. Applications should learn about FUSE IDs with sufficient context to know what application state to associate with the FUSE ID. Though failure handlers can simply perform garbage collection of the associated application state, a handler is also free to attempt to re-establish the application state using a new FUSE group, or to execute arbitrary code. For brevity, we refer to all of these permissible application- level actions using the short-hand “garbage collection.”
The application handler is invoked whenever the FUSE layer believes a failure has occurred, either because of a node or communication failure or because the appli- cation explicitly signalled a failure event at one of the group members. If RegisterFailureHandler is called with a FUSE ID parameter that does not exist, perhaps because it has already been signalled, the handler callback is in- voked immediately. Applications that wish to explicitly signal failure do so by calling the SignalFailure function.
3.2 Group Creation
Group creation can be implemented in one of two ways: it can return immediately, or it can block until all nodes in the group have been contacted. Returning immediately reduces latency, but because FUSE has not checked that all group members are alive, the application may perform expensive operations, only to have FUSE signal failure a short time later. In contrast, blocking until all members have been contacted increases creation la- tency, but decreases the likelihood that the FUSE group will immediately fail. We chose to implement blocking create; this provides application developers the seman- tic guarantee that if group creation returns successfully, all the group members were alive and reachable. A high enough rate of churn amongst group members could re- peatedly prevent FUSE group creation from succeeding. However, based on the low latency of FUSE group cre- ation (Section 7), such a high churn rate is likely to cause the system to fail in other ways before FUSE becomes a bottleneck.
When CreateGroup is called, FUSE generates a glob- ally unique FUSE ID for the group. Each node is then contacted and asked to join the new FUSE group. If any group member is unreachable, all nodes that already learned of the new FUSE group are then notified of the failure. Group members that learned of the group but sub-
sequently become unreachable similarly detect the group failure through their inability to communicate with other group members. If the FUSE layer is successfully con- tacted on all members, the FUSE ID is returned to the CreateGroup caller.
FUSE state is never orphaned by failures, even when those failures occur just after group creation. An applica- tion may receive a FUSE ID from the group creator, and then attempt to associate a failure handler with this FUSE group, only to find out that the group no longer exists be- cause a failure has already been signalled. This causes the failure handler to be invoked, just as if the notification had arrived after the failure handler was registered.
3.3 Liveness Monitoring and Failure Notifica- tion
Once setup is complete, our FUSE implementation monitors the liveness of the group members using a span- ning tree whose individual branches follow the overlay routes between the group creator and the group members. Each link in the tree is monitored from both sides; if either side decides a link has failed, it ceases to acknowledge pings for the given FUSE group along all its links. When this occurs, one could immediately signal group failure, but our implementation instead attempts repair, as will be explained in more detail in Section 6.
This mechanism allows FUSE to guarantee that any member of the group can cause a failure notification to be received by every other live group member. FUSE in- vokes the failure notification handler exactly once on a node before tearing down the state for that FUSE group. A node hearing the notification does not know whether it was due to crash, network disconnect or partition, or if the notification was explicitly triggered by some group mem- ber. Explicit triggering is a necessary component of FUSE because FUSE does not guarantee that it will notice all persistent communication problems between group mem- bers automatically; it only guarantees that a communica- tion failure noticed by any group member will soon be detected by all group members.
FUSE only guarantees delivery of failure notifications, and only to nodes that have already been contacted during group creation. Note that FUSE clients cannot use this mechanism to implement general-purpose reliable com- munication. Therefore, well-known impossibility results for consensus do not apply to FUSE [22, 24]. A concrete example illustrating this limitation is a network partition. FUSE members on both sides of the partition will receive failure notifications, but it is not possible to communicate additional information, such as the cause of the failure, across the partition.
FUSE will sometimes generate a notification to the en- tire group even though all nodes are alive and the next at- tempted communication would succeed. We refer to such a notification as a false positive. It is easy to see how false positives can occur – transient communication fail- ures can trigger group notification. The possibility of false
positives is inherent in building distributed systems on top of unreliable infrastructure. One can tune the timeout and retry policy used by the liveness checking mechanism, but there is a fundamental tradeoff between the latency of fail- ure detection and the probability that timeouts generate false positives. We do not provide an API mechanism for applications to modify the FUSE timeout and retry pol- icy. Providing such a mechanism would add complexity to our implementation, while providing little benefit: ap- plications already need to implement their own timeouts, as dictated by their choice of transport layer. FUSE re- quires this participation from applications because FUSE does not necessarily monitor every link.
Because we implement liveness checking using over- lay routes, the maximum notification latency is propor- tional to the diameter of the overlay: successive failures at adversarially chosen times could cause each link to fail exactly one failure timeout after the previous link. How- ever, we expect notification after a failure to rarely require more than a single failure timeout interval because our FUSE implementation always attempts to aggressively propagate failure notifications. Also, application develop- ers do not need to know the maximum latency in order to specify their timeouts. As mentioned above, sends should be monitored using whatever timeout is appropriate to the transport layer used by the application. If the sender times out, it can signal the FUSE layer explicitly. If a node
Our website has a team of professional writers who can help you write any of your homework. They will write your papers from scratch. We also have a team of editors just to make sure all papers are of HIGH QUALITY & PLAGIARISM FREE. To make an Order you only need to click Ask A Question and we will direct you to our Order Page at WriteDemy. Then fill Our Order Form with all your assignment instructions. Select your deadline and pay for your paper. You will get it few hours before your set deadline.
Fill in all the assignment paper details that are required in the order form with the standard information being the page count, deadline, academic level and type of paper. It is advisable to have this information at hand so that you can quickly fill in the necessary information needed in the form for the essay writer to be immediately assigned to your writing project. Make payment for the custom essay order to enable us to assign a suitable writer to your order. Payments are made through Paypal on a secured billing page. Finally, sit back and relax.
About Wridemy
We are a professional paper writing website. If you have searched a question and bumped into our website just know you are in the right place to get help in your coursework. We offer HIGH QUALITY & PLAGIARISM FREE Papers.
How It Works
To make an Order you only need to click on “Order Now” and we will direct you to our Order Page. Fill Our Order Form with all your assignment instructions. Select your deadline and pay for your paper. You will get it few hours before your set deadline.
Are there Discounts?
All new clients are eligible for 20% off in their first Order. Our payment method is safe and secure.